Emergency lighting monthly function test

BS 5266-1 and BS EN 50172 call for every emergency luminaire to be function-tested monthly and duration-tested annually, with the results logged. Run this per floor or per building; each luminaire is a row with pass, fail and a photo on fail, and the annual duration result has its own fields.

4 sections, 14 items

1Before the test

  1. Test key or test facility located; time of test recorded *

    Yes / no
  2. Occupancy low or alternative lighting available during the test

    Required for the annual duration test.

    Yes / no

2Per luminaire (repeat for each fitting)

  1. Luminaire reference and location *

    Text
  2. Charge indicator lit before the test *

    Pass / fail
  3. Luminaire illuminates when mains is interrupted *

    Pass / fail
  4. Exit sign legend legible and lit

    Pass / fail
  5. Fitting clean, undamaged, diffuser in place, not obstructed

    Pass / fail
  6. Charge indicator lit after mains restored *

    Pass / fail
  7. Photo of any failed fitting

    Photo

3Annual duration test

  1. Rated duration of the system (hours)

    Number
  2. Duration achieved before any fitting failed (minutes)

    Number
  3. All fittings still lit at the end of the rated duration

    Pass / fail

4Sign-off

  1. Number of fittings failed and jobs raised

    Text
  2. Tester signature *

    Signature

* Required

Import it, tag one asset, run the check

Your first asset is free, with no card. The checklist comes with you.

Start free Request a demo